Log In
watch our corporate video


Fairview Fittings & Mfg. Ltd. is pleased to announce the official opening of their new Canadian Distribution Centre at 1170 Invicta Drive, Oakville, Ontario (Canada) L6H 6G1, Ph: (905) 338-0800/Fx: (905) 338-0060. Fairview’s move to this new facility provides increased capacity and more efficient supply chain solutions for stock replenishment to their 8 Canadian Warehouse locations. Fairview’s Canadian Corporate Head office will also be moving to the new Oakville facility. Operations out of the Toronto, Ontario D.C. on Attwell Drive will cease effective February 1, 2015. Thanks, Jim Forbes Vice President of Sales Fairview Fittings & Manufacturing Ltd.

Forged brass fittings produced using UNS C37700 forging brass bar are the best, safest choice for Natural gas and LP-gas installations where temperature changes and permeation of gases through a porous fitting body could lead to injury of people or property.

Forged brass fittings produced using UNS C37700 forging brass bar are the best, safest choice for Natural gas and LP-gas installations where temperature changes and permeation of gases through a porous fitting body could lead to injury of people or property.

Genuine forged brass fittings are produced using UNS C37700 forging brass bar. The brass bars are cut into slugs, which are heated to relieve material stress and placed on a set of dies in a forging press. Thousands of tons of pressure are exerted on the red-hot slugs until they are compacted into forged blanks of the intended shape. The shape is then trimmed and cleaned before being machined into the finished product.

The double heating of the material drastically reduces the threat of "season cracking" and the compacting of the slug eliminates porosity in the fitting, while making it strong enough to withstand large amounts of torque. 

Double Swivel Air Brake Lines Now Available Complete With : • SAE J1402,rubber air brake hose with factory crimped ends. • Red or blue GLAD GRIPS for easy glad hand connection, identification and hose bend protection • Swivel fitting with spring guard for easy tractor end installation. • Internal live swivel at trailer end for added strain relief. • Assemblies meets D.O.T F,M.V.S.S 106 PART No. HABRED-15GGSD

-40°F, -40°C Optional Gladhand Version Available. Change Suffix to: GGSG-GH


Emerson Process Management appoints Fairview Fittings as Distributor for Fisher® LP-Gas Equipment

Emerson Process Management announces that it has expanded its Approved Distribution Channels with the appointment of Fairview Fittings as a distributor of Fisher® LP-Gas Equipment. Fairview Fittings is a leading supplier of gas fittings, hose assemblies and gas control components through distribution facilities in Moncton, Montreal, Toronto, Winnipeg, Saskatoon, Edmonton, Calgary and Vancouver. The appointment expands its product portfolio and provides an increased range of solutions for customers.

"We have a long history of exceptional customer service and support," said Leslie Woodward, President, COO, Fairview Fittings. "Our broad application knowledge across industries throughout Canada will further enhance the distribution and support for Emerson’s Fisher® LP-Gas Equipment."

“Emerson is thrilled to add Fairview Fittings’ service and support capabilities to our strong
distribution and support network in Canada.” said Michael Hiefner, Sales Director, Emerson’s
Fisher LP-Gas Equipment.

Fairview Fittings & Manufacturing Limited started business in 1969 as a manufacturer of
LP-Gas fittings and hose assemblies. Since then, it has become an international company with
more than 15,000 active products. 




What does lead free mean?

Lead free means not more than 0.20 percent lead content for solder and flux and not more than a weighted average of 0.25 percent lead with respect to the wetted surfaces of pipes and pipe fittings, plumbing fittings and fixtures etc. that are intended to convey or dispense water for human consumption through drinking or cooking. 


How does lead enter the drinking water?

Lead enters water through the corrosion of pipes and plumbing fixtures, solder and fittings


Status of Low Lead requirements in Canada

ASME A112.18.1/CSA N125.1 and CSA B125.3 standards for Plumbing fittings were amended as of December 2012 to include the following under section 4.9 Toxicity and Lead Content:


Fittings intended to convey or dispense water for human consumption through drinking or cooking shall not contain a weighted average lead content in excess of 0.25% when evaluated in accordance with the test method specified in NSF/ANSI 372


When Do the “No Lead” Rules come into effect?

The “No-Lead” rules officially become law when the Provinces and Territories reference the new Model Codes in legislation.  It is anticipated the Provinces and Territories will begin enforcing at the beginning of 2014.


Reduction of lead free in drinking water does not apply to: Pipe, pipe fittings, plumbing fittings, or fixtures that are used exclusively for non-portable services such as manufacturing, irrigation, outdoor watering or any other uses where the water is not used for human consumption


Who is responsible for compliance with the legislation?

All Plumbers, manufacturers, distributors, builders etc. must comply with these new regulations.


How to Identify Fairview No Lead products

Fairview “Lead Free” brass product numbers will be prefixed with the letters LF (eg . LF-62-6, LF-BV4103-D).  All fittings will be bar marked “LF” or with the words “Lead-Free” on brass ball valve handles as space permits.  Fairview Bulk Bag and Master Carton Labels will be white with blue printing prominently featuring the words “(LEAD-FREE BRASS)”  

WARNING: Because lead-free brass is harder it can also be more brittle. To prevent cracking, extra care should be taken not to over-tighten lead-free fittings.





June 2013 


RE: Fairview Lead-Free Brass Valves and Fittings



Dear Valued Customer,


As you may already be aware, as of December 31st, 2013, brass fittings and valves containing lead in excess of .25% will no longer be permitted for use in potable (drinking and cooking) water systems in Canada or the USA.


NOTE: This requirement does not apply to products where the water is not used for human consumption


Fairview has designed and will soon be manufacturing fittings and valves using Lead-Free brass. 


In the event that you require Lead-Free products, we have attached a list of - soon to be available – Fairview Lead-Free part numbers and descriptions.  We anticipate that Lead-Free brass products will be available to ship from stock at Fairview around October/November 2013.


Standard (leaded brass) products corresponding with the starred (**) items on the attached list are now designated as “Special Order.”  These items will no longer be available from stock with lead content and customer returns of these products can no longer be accepted.


A FAQ sheet for Lead-Free brass is attached for your reference.  If you have any further questions, please contact your nearest Fairview location or email us at: service@fairviewfittings.com



Yours truly,


Peter Conn

Marketing Manager

Fairview Fittings & Mfg. Ltd.


  • 06/02/2015
    New Location Announcement
  • 04/11/2014
    XLooking for Genuine Hot Press Forged Brass Fittings?
  • 17/04/2014
    POLYSPRING® & POLYWIRE® Series Now Available at Fairview
  • 27/02/2014
    Double Swivel Air Brake Lines Now Available
  • 20/08/2013
    Fairview Fittings as Distributor for Fisher®
  • 15/07/2013
  • 12/07/2013
    Lead Free Products Available in November 2013
view archived news

Request A Catalogue

*mandatory fields


thank you

Thank you for your interest in Fairview Fittings & Manufacturing. Your information will be forwarded to the applicable buyer, who will review it and provide you with either a complete “Vendor Compliance Booklet” outlining the next steps or an explanation of why it is being rejected.