b'WATER HOSE ASSEMBLIESPRESSURE WASH HOSE ASSEMBLIES S E & O H E B S A L I E S M SBLACK COVER (4,000 P.S.I.) Length Actual I.D. (PW2) is a one wire construction, black, blue or grey covered hose. Its tubePART No. (FT.) (IN.)is specially formulated to handle high pressure water. Suitable for pressuresPW2A-6-25 25 3/8up to 4,000 P.S.I., at +21C (+70F) or temperatures up to +121C (+250F)PW2A-6-30 30 3/8PW2A-6-50 50 3/8at lower pressures. PW2A-6-75 75 3/8PW2A-6-100 100 3/8Style of bend protectors may vary.BLUE NON-MARKING COVER (4,000 P.S.I.) Length Actual I.D. (PW3) is a one wire construction hose with a special blue non-markingPART No. (FT.) (IN.)cover. Suitable for pressures up to 4,000 P.S.I., at +21C (+70F) orPW3A-4-30 30 1/4temperatures up to +135C (+275F) PW3A-4-50 50 1/4PW3A-4-100 100 1/4PW3A-6-25 25 3/8Swivels on both ends available upon request.PW3A-6-30 30 3/8Suffix PART No. with SW Example: PW3A-6-50SW PW3A-6-35 35 3/8PW3A-6-50 50 3/8PW3A-6-75 75 3/8PW3A-6-100 100 3/8PW3A-6-50SW 50 3/8GREY COVER HIGH PRESSURE (6,000 P.S.I.) Length Actual I.D. (PW4) is a two wire construction, grey wrapped cover hose. Suitable forPART No. (FT.) (IN.)pressures up to 6,000 P.S.I., at +21C (+70F) or temperatures up to +121CPW4A-6-30 30 3/8(+250F) at lower pressures. PW4A-6-50 50 3/8PW4A-6-75 75 3/8PW4A-6-100 100 3/8RED NON-MARKING HIGH TEMP (3,000 P.S.I.) Length Actual I.D. (PW5) is a one wire construction, Red non-marking heat resistant smoothPART No. (FT.) (IN.)cover, dual purpose hose. This hose will handle steam up to +163CPW5A-6-30 30 3/8(+325F) at 350 P.S.I. and hot water to +121C (+250F) at 3,000 P.S.I.PW5A-6-50 50 3/8PW5A-6-75 75 3/8PW5A-6-100 100 3/8NOTE: The outer cover of PW5 hose must be skived (removed) before attaching over the wire crimp ends.NOTE: Any ambient or internal increase in temperature will lower the above listed working pressures.39'