b'STEEL HOSE ENDSLUBE HOSE ENDS FOR USE WITH S.A.E. 100R7 HOSES.A.E. STEEL REUSABLE ENDSMale PipeFemale S.A.E.Flare Female(Swivel) FlarePART No. Hose I.D. Pipe (Swivel)SC725-2A 1/8 1/8SC725-3A 3/16 1/8 PART No. Hose I.D. TubeSC725-4B 1/4 1/4 PART No. Hose I.D. Tube SR738-24 1/8 1/4SC738-24 1/8 1/4SC738-34 3/16 1/4SC738-44 1/4 1/4 Male PipeMale Pipe SC738-46 1/4 3/8(Swivel) (Swivel) S D N E E S O HPART No. Hose I.D. Pipe PART No. Hose I.D. PipeSC725SW-2A 1/8 1/8 SR725SW-2A 1/8 1/8CRIMP SPECIFICATIONS FOR PERMANENTLY ATTACHED HOSE ENDSCrimp DIA.All hydraulic assemblies should be PART No. Description Dash Size Hose I.D. SC700 Seriespressure tested prior to use. HR7-2 S.A.E. 100R7 -2 1/8 0.3650NOTE: Fairviews Accutek 100R7 hoseHR7-3 S.A.E. 100R7 -3 3/16 0.5100ends are not to be swaged. HR7-4 S.A.E. 100R7 -4 1/4 0.5550IMPORTANT: This reference chart is provided by Fairview Ltd. for convenience only. The information contained herein cannot be guaranteed because conditions of use are beyond our control, such as variances in hose outside diameters. This document should not be substituted for the judgement of a qualified professional. Assemblies should be tested prior to installation. The user of this information assumes all risk associated with its use.STEEL HOSE INSERTSHose Insert 90 Elbow 45 Elbowto Male Pipe Hose Insert Hose Insertto Male Pipe to Male PipePART No. Hose I.D. Pipe PART No. Hose I.D. PipeS1125-10C 5/8 3/8 S1140-10D 5/8 1/2S1125-10D 5/8 1/2 PART No. Hose I.D. Pipe S1140-12E 3/4 3/4S1125-12E 3/4 3/4 S1139-10D 5/8 1/2S1139-12E 3/4 3/4S1139-16H 1 1 90 ElbowHose Insert Hose Insertto Male O-Ring 45 Elbow to Male O-RingHose InsertPART No. Hose I.D. O-Ring to Male O-Ring PART No. Hose I.D. O-RingSO1125-6 3/8 9/16 - 18 SO1139-4 1/4 7/16 - 20SO1125-12 3/4 1-1/16 - 12 SO1139-6 3/8 9/16 - 18SO1125-16 1 1-5/16 - 12 SO1139-8 1/2 3/4 - 16SO1125-1612 1 1-1/16 - 12 PART No. Hose I.D. O-Ring SO1139-16 1 1-5/16 - 12SO1125-20 1-1/4 1-5/8 - 12 SO1140-16 1 1-5/16 - 12 SO1139-1612 1 1-1/16 - 1261'