b'BRASS RING-BARB FITTINGS FOR POLY TUBE (USE WITH POLYETHYLENE TUBE: Page 31) Coupling BulkHead 1 2Tee TubeTube Union Three Endsto Tube3PART No. Tube O.D. Tube I.D. PART No. Tube O.D. Tube I.D.964-4 1/4 .170962-4 1/4 .170 PART No. Tube O.D. Tube I.D. 964-6 3/8 .250962-6 3/8 .250 977-4 1/4 .170 964-8 1/2 .375 Connector 90 ElbowTube to Tube RING-BARB fittings are designed S D N E E S O H Female pipe to Tube for use with FAIRVIEW POLYETHYLENE TUBE. The barb PART No. Tube O.D. Tube I.D. Pipe PART No. Tube O.D. Tube I.D. has a raised ring that imbeds into 966-4A 1/4 .170 1/8 965-4 1/4 .170966-4B 1/4 .170 1/4 965-6 3/8 .250965-8 1/2 .375 the tube. This assures a leakproofConnector connection when used within the Tube to 90 Elbow normal temperature and pressure Male pipe Tube toMale Pipe range of the tube. Simply push fitting into tube to assemble. PART No. Tube O.D. Tube I.D. Pipe968-4A 1/4 .170 1/8 No tools or clamps required.968-4B 1/4 .170 1/4 PART No. Tube O.D. Tube I.D. Pipe968-6A 3/8 .250 1/8 969-4A 1/4 .170 1/8968-6B 3/8 .250 1/4 969-4B 1/4 .170 1/4969-6A 3/8 .250 1/8969-6B 3/8 .250 1/4SEE TUBE SECTION FOR POLY TUBENote:Use of Fairview hose and tube with other than Fairview original recommended fittings, may void warranty. Verify with a Fairview representative prior to installation.BRASS SCREW-ON REUSABLE HOSE FITTINGSHose Stem Hose StemHose with Male with FemaleFerrules Pipe Thread Pipe Thread(Two Piece Swivel)PART No. Hose O.D. Hose I.D. PART No. Hose I.D. Pipe PART No. Hose I.D. Pipe750-84 1/2 1/4 751-4B 1/4 1/4 752-4B 1/4 1/4750-106 3/8 3/8 751-6B 3/8 1/4 752-6B 3/8 1/4750-116 11/16 3/8 751-6C 3/8 3/8 752-6C 3/8 3/854'