b'REUSABLE END FITTINGS FOR PTFE HOSEFOR USE WITH S.A.E. 100R14 SMOOTH BORE PTFE HOSE ALL WETTED PARTS ARE BRASSFemale Male PipeSwivel Replacement37 S.A.E. SleeveFlarePART No. Nominal Hose I.D. PipeSR425-4A 1/4 1/8 PART No. Nominal Hose I.D. TubeSR425-4B 1/4 1/4 SR438-44 1/4 1/4 PART No. Nominal Hose I.D.SR425-6B 3/8 1/4 SR438-55 5/16 5/16 SR4S-4 1/4SR425-6C 3/8 3/8 SR438-66 3/8 3/8 SR4S-6 3/8SR425-8D 1/2 1/2 SR438-88 1/2 1/2 SR4S-8 1/2SR425-10D 5/8 1/2 SR438-1010 5/8 5/8 SR4S-10 5/8SR425-12E 3/4 3/4 SR438-1212 3/4 3/4 SR4S-12 3/4S D N E E S O HFemaleD.O.T.Swivel Air Brake45 S.A.E. CompressionFlare STAINLESS STEEL AVAILABLEUPON REQUEST (SSR4 Series )PART No. Nominal Hose I.D. Tube PART No. Nominal Hose I.D. TubeSR428-44 1/4 1/4 SR468-1010 5/8 5/8SR428-55 5/16 5/16SR428-66 3/8 3/8SR428-88 1/2 1/2SR428-1010 5/8 5/8SR428-1212 3/4 3/4PTFE REUSABLE FITTINGS ASSEMBLY INSTRUCTIONSSTEP 1 STEP 4Wrap masking tape around hose atLubricate stem and shell threads. desired length and cut square withPush hose onto stem with twisting fine-tooth hack saw. Trim any loosemotion until hose seats againstwires and slip two shells on back tostem chamfer. Push shell forward back, placing them about 3 Fromand hand start threading.each end of hose.STEP 2 STEP 5Use a flat surface to push the sleeveWrench tighten stem until clearanceover the tube underneath the wirewith shell is 1/32 or less. Clean, until the tube stock butts against inspect and test.the inside shoulder of the sleeve.STEP 3Mount stem hex in vise. Work the hose bore over the stem to size tube.63'