b'PERMANENTLY ATTACHED HOSE ENDSFOR SAE 100R7, 100R8 AND 100R18 THERMOPLASTIC HOSENOT FOR USE ON REDUCED OD S.A.E. 100R7Female 90 ElbowMale Pipe NPSM Pipe S.A.E. 37(Swivel) Female Flare(Swivel)PART No. Hose I.D. Pipe PART No. Hose I.D. PipeSCTP25-2A 1/8 1/8 SCTP26SW-3B 3/16 1/4 PART No. Hose I.D. TubeSCTP25-3A 3/16 1/8 SCTP26SW-4B 1/4 1/4SCTP25-3B 3/16 1/4 SCTP26SW-6B 3/8 3/8 SCTP39-34 3/16 1/4SCTP25-4A 1/41/8 SCTP39-45 1/4 5/16SCTP25-4B 1/41/4 SCTP39-66 3/8 3/8S D N E E S O H SCTP25-4C 1/43/8 SCTP39-88 1/2 1/2SCTP25-5B 5/16 1/4SCTP25-6C 3/83/8 J.I.C. 37SCTP25-8D 1/21/2 Male FlareSCTP25-12E 3/43/4SCTP25-16H 11 45 ElbowJ.I.C. 37Female FlarePART No. Hose I.D. Tube (Swivel)Male Pipe SCTP37-66 3/8 3/8(Working Swivel)S.A.E. 37PART No. Hose I.D. TubeFemale Flare SCTP40-66 3/8 3/8PART No. Hose I.D. Pipe (Swivel)SCTP25SW-4B 1/41/4 SCTP25SW-6C 3/83/8 SCTP25SW-8D 1/21/2Female O-RingPART No. Hose I.D. TubeSCTP38-24 1/81/4 Face SealSCTP38-34 3/16 1/4 (Swivel)SCTP38-44 1/41/4SCTP38-45 1/45/16All hydraulic assemblies shouldSCTP38-46 1/43/8SCTP38-66 3/83/8be pressure tested prior to use. SCTP38-68 3/81/2SCTP38-88 1/21/2 PART No. Hose I.D. ORFSSCTP38-1212 3/43/4 SCTP58-66 3/8 11/16 - 16CRIMP SPECIFICATIONS FOR PERMANENTLY ATTACHED HOSE ENDS (FOR USE WITH ALL HR7, HR8 & HR18 HOSE TYPES)CrimpDash Size Inside Diameter (IN.) Outside Diameter (IN.)-2 1/8 0.365-3 3/16 0.500-4 1/4 0.555 All hydraulic assemblies should-5 5/16 0.630 be pressure tested prior to use.-6 3/8 0.675-8 1/2 0.830-12 3/4 1.080-16 1 1.340IMPORTANT: This reference chart is provided by Fairview Ltd. for convenience only. The information contained herein cannot be guaranteed because conditions of use are beyond our control, such as variances in hose outside diameters. This document should not be substituted for the judgement of a qualified professional. Assemblies should be tested prior to installation. The user of this information assumes all risk associated with its use.66'