b'THREAD SEALANTSU.L. & U.L.C. LISTED PTFE PTFE THREAD SEALANT COMPOUNDTHREAD SEALANT TAPEThe ideal sealant for pipe thread connections. TEMPERATURE RANGES: It is non-toxic and will not contaminateuids-50F to +400F (-45C to +204C)or gases. Chemically inert, it resists corrosive BRUSHABLE TO: -50F, -46Caction of acids, alkalies and solvents. U.L. and PRESSURE RANGES: U.L.C. listed for Natural Gas (TO 1000 P.S.I.)Gases to 2000 P.S.I. and Propane installations.Liquids to 8000 P.S.I.MATERIAL USE: Brass and All Metal, TEMPERATURE RANGE:ABS, PVC, CPVC, Nylon -450F to +500F (-268C to +260C) NOTE: NOT SUITABLE FOR OXYGENTapeLength/RollPART No.Width(IN.) BRUSH TOP TIN121-M8UL1/2236121-M12UL3/4236 TUBEPTFE THREAD SEALANT TAPE PART No.SizeCarton Qty.TTS-2 2 oz. Tube72The ideal sealant for pipe threadTTS-4 4 oz. Tin24connections. It is non-toxic and will notTTS-8 8 oz. Tin24contaminateuids or gases. ChemicallyTTS-1616 oz. Tin12inert, it resists corrosive action of acids, alkalies and solvents.TEMPERATURE RANGES: -50F to +400F (-45C to +204C)TEMPERATURE RANGE:BRUSHABLE TO: -50F, -46C-450F to +500F (-268C to +260C) PRESSURE RANGES:Gases to 3000 P.S.I.INDUSTRIAL SEALANT TAPE Liquids TO 6000 P.S.I. TapeTapeLength/RollMATERIAL USE: Brass and All Metal,PART No. Width Thickness(IN.) ABS, PVC, CPVC, Nylon 121-M8 1/2 .003480121-M12 3/4 .003480NOTE: NOT SUITABLE FOR OXYGEN.121-M161 .003480 CERTIFIED TO CSA NO. 4-90 US AND CAN/ULC-S642-M87 METAL THREADSHIGH DENSITY INDUSTRIAL SEALANT TAPE ONLY THROUGH 2 DIA. +125F TO -40F TapeTapeLength/Roll 125 PSIG FOR USE WITH NATURAL, PART No. Width Thickness(IN.) BRUSH TOP TIN PROPANE &BUTANE (VAPOR STATE) 121-M8PINK1/2.004540 GASES ONLY.121-M12PINK3/4.004540121-M16PINK1.004540TUBEMETALLIC PTFE THREAD SEALANTPART No.SizeCarton Qty.Masters Metallic Compound is a heavy dutyTTSG-22 oz. Tube72pipe thread sealant of proven quality for useTTSG-44 oz. Tin24on both metal and plastic thread connections.TTSG-88 oz. Tin24This all-weather product: Lubricates during assembly - Never sets up hard - Can be easilyGAS-FLO LEAK DETECTION FLUIDdisassembled even after years of service. Masters(LOW - TEMP)Metallic Compound is non-corrosive and prevents galling and seizing. It will not dry out or hardenTest It Before You Use It.BRUSH TOP TIN in the container. Available in plain and brush-top. Masters Metallic Compound effectively seals mostA low cost method of testing gas connections for leaks prior to liquids and gases against leakage up to 6900 kpa /use. Non-Corrosive. Halogen and Chloride Free.1000 psi and +700F, +371C.Good for use in temperatures down to: -40C / -40F.PART No.SizeCarton Qty. PART No.DESCRIPTIONTTSM-88 oz. Tin25 LD-8LT8 oz. Squirt BottleTTSM-3232 oz. Tin6 Meets ASME Requirements 245'